RO 380 LCD
5-stage reverse osmosis water purifier with high performance 200 and 180 GPD membranes.
Waste water rejection has been reduced by at least 50% compared to competitor models. New LCD Computer Controlling automatic flushing Increasing Lifetime of membrane! The display also shows the TDS of the water, so you can monitor the quality of the output water. Also fitted with a leak protection.
A new generation of direct flow RO water purifiers, representing the pinnacle of water purification. No tank needed. Small space requirements, advanced technology. New design pumps consume 20-40% less energy than their predecessors.
The RO-380 (200/180) LCD Direct Flow System RO Water Purifier is equipped with 2 high capacity membranes (200 and 180 GPD), capable of producing clean water directly, without the need for a separate tank, Approx. flow rate 1lpm
Pure water capacity: 0.9 - 1.2 l / min
Waste water production: 0.5 l / min
Device size: 19 x 36 x 45 cm
5-stage system (5 micron sediment filter, activated carbon filter, 1 micron mechanical filter, 1x 200 GPD membrane and 1x 180 GDP membrane and GAC activated carbon post filter).
Reverse Osmosis (Reverse Osmosis or RO) is a modern water purification solution that removes organic impurities, limescale, dissolved particles, heavy metals, arsenic, nitrates, bacteria, viruses and even hormones from drinking water. Thin Film Membrane Technology makes it possible.
The water is first passed through the main 3-stage pre-filtration housing. This pre-filtration removes all impurities and larger organic and inorganic materials, sand, rust, chlorine down to 1 micron, thus ensuring optimum membrane protection and lifetime. After pre-filtration, water enters the membrane housing where it is filtered at 0.0001 micron, 1000 times the size of bacteria and 100 times smaller than viruses, so that they cannot pass through which allows only pure water molecules. In contrast, various contaminants cannot penetrate the membrane, remain behind, and escape from the drinking water through the drain hose. At the end of the filtration process, the pure water then passes through the activated carbon post-filter, to improve the final taste. An optional mineral filter can be added which is recommended for drinking water applications.
The unit is also equipped with a water pressure booster pump which ensures a steady loading of the membrane and stable operation of the unit on low water pressure systems.
Filters need to be replaced periodically to ensure that your water purifier produces high quality water for a long time. It is recommended that the pre-filters be replaced every 6 months, post-filter be replaced every 6-12 months and the membrane (2pcs) every 2-3 years
inline mineral filter (2" x 10")