200 GPD Reverse Osmosis Membrane TFC 2012 - 200GPD
These R.O. TFC (thin film composite) membranes are available in flow rates up to 200 Gallons per day for use in standard residential membrane housings.
All models are certified to NSF/ANSI 58 for the reduction of Arsenic ("V" pentavalent), Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Cysts, Turbidity, Fluoride, Lead, Radium 226/228, Selenium and TDS and are certified D.M. 174/2004 (Italian Ministerial Decree).
The membrane removes up to 98% of total dissolved solids (TDS), delivering healthier and safer drinking water. Features:
* High Rejection & Flow Rate
* Standard dimensions: can be fitted in any RO systems
* Max. inlet Hardness: 25°F. (250ppm)
* Max. Free Chlorine: 0.1 ppm
Type of membrane: Spiral wound
Active surface: 200 GPD 0.64 m2 (6.9 sq. ft)
The rejection rate percentage can vary on the basis of water pressure, PH, temperature and general water quality of the feed water. Suggest replacement of membrane elements: when flow comes too slow or at least 24 Months.
WARNING The reverse osmosis is not a device that makes polluted water drinkable (non-drinkable water into drinkable water). Do not use the system where the water is microbiologically dangerous or of unknown quality without adequate disinfection before and after the system. All systems must be used in accordance with the manufacture instructions.